 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
|
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
 |
 |
 |
Digital Boost/Vacuum Test Gauge | |
|
|
||
| This is the best calibrated instrument to use for testing your boosted car with accurate vacuum and boost indication. With a scale range of -29.9Ó Hg vacuum to 99.9 PSIG and with a resolution of 0.1" Hg vacuum and 0.1 PSIG you will know you are getting accurate data information. . Plus, you can Zero the instrument for repeatable data readings. All pressure gauges read atmosphere pressure and with the engine off, they can indicate a little above or below 0 PSIG. You need to take this in consideration if you are going to accumulate data. The display uses large LCDÕs with tenth of a degree indication. Power source uses a 9 volt battery with an ON/OFF switch for long life. This is the instrument that TDR uses for their data accumulation. | ||
|
Code: TDR-DIG-G |
||
© 2006 Track Dog Racing, All rights reserved.
Site built by Preston
Design