|
|
|
Track
Dog Racing is now an authorized dealer for Hard Dog Rollbars.
We are firm believers that roll bars are necessary in any
open cockpit performance car, and Hard Dog rollbars are second
to none in quality, design and style. Order
your rollbar from TDR today and we'll take $25,00 off the
cost of shipping . We
recommend either the M1 or M2
Hardcore, or the M1 or M2
Sport when doing track events and performance driving. Deciding
which one will work best for you depends on your height, driving
position and your car's top/window configuration.*
Hard Dog also offers the Hard
Bar, Deuce, Ace and the Extreme
for use on the street. Although these three bars offer rollover
protection they may not meet the specifications of tech inspections
at some performance driving events. They do fit all years
of Miatas and offer a unique appearance if you're looking
for an option to the Hardcore or Sport.
Refer to the chart below to see which
Hard Dog Roll Bar will best fit your MIata. We recommend that
you contact us
by e-mail or call us directly at 214-340-9797 and
we'll help you select the proper rollbar and shipping method
to meet all your needs. We can also do the installation if
your in the Dallas-Fort Worth area. |
|
| WARNING: This article is sold without warranty, expressed or implied. No warranty is made to this product's ability to protect the user from any injury or death. The user assumes that risk. |
|
|
| |
|
* The M2 Sport will also fit the '90-'97 M1. The non diagonal version
is compatible with most after market glass rear windows and special
diagonal verisons are available for the Robbins with glass window.
Contact us for more information.
** Must be side braced only. The center braced "Deuce" is not compatible
with aftermarket glass window tops |
| |
| M2 HardDog Sport ('99-'05) |
|
|

 |
The
M2 Sport Bar uses the same main hoop mounting system as the
original Hard Bar Sport. The redesigned
rear braces allow room for the '99 + M2 Mazda glass rear window.
The M2 Sport will also fit the '90-'97 M1. The non diagonal
version is compatible with most after market glass rear windows
and special diagonal versions are available*. One or two main
hoop diagonal braces and/or harness attachment tabs may be
added. |
| |
Allows full seat travel and tilt |
| |
Full interior height and width; farther
to the rear than the hard core allowing better head clearance |
| |
Complete use of hard top and soft top |
| |
Available with a durable black powdercoat
finish or polished stainless steel |
| |
Constructed of highest quality tubing
1.5" D x .120" wall |
| |
3/16" mounting and backup plates |
| |
Complete hardware kit with grade 8
bolts and instructions |
|
| Code: |
Description: |
Price: |
| 9S |
Black Powdercoat with NO diagonal |
$315 |
| 9S1D |
Black Powdercoat with single diagonal |
$350 |
| 9S2D |
Black Powdercoat with double diagonal |
$385 |
| S9S |
Stainless Steel w/NO diagonal |
$920 |
| S9S1D |
Stainless Steel w/single diagonal |
$1030 |
| S9S2D |
Stainless Steel w/double
diagonal |
$1140 |
| H |
Harness Tabs |
$35 |
|
|
| Back to top |
| M2 Hard Core ('99-'05) |
|
|

 |
The
M2 Hard Core Bar is designed for the serious SCCA Solo I competitor
that wants to maintain a dual purpose car for street and racing
use. Hard Core Hardtop and M1 Hard Core
versions available. Compatible with the 1999 and newer Mazda
glass rear window or equivalent size aftermarket only. |
| |
Complete use of soft top |
| |
Available with durable black powdercoat
finish or polished stainless steel |
| |
Constructed of highest quality tubing
1.75" D x .120" wall |
| |
3/16" mounting and back-up plates |
| |
Single main hoop diagonal brace and
harness tabs standard. Double diagonals optional for strength
and better rear vision. |
| |
Full interior width |
| |
Complete hardware kit with grade 8
bolts and instructions |
|
| Code: |
Description: |
Price: |
| 9B1 |
Black Powdercoat with single diagonal |
$415 |
| 9B2 |
Black Powdercoat with double diagonal |
$450 |
| S9B1 |
Polished Stainless Steel
w/single diagonal |
CALL |
| S9B2 |
Polished Stainless Steel
w/double diagonal |
CALL |
| BHB |
Bolt-in harness bar |
$135 |
| M2 Hardcore
Hardtop |
| NB1 |
Black Powdercoat with single diagonal |
$425 |
| NB2 |
Black Powdercoat with double diagonal |
$460 |
| SNB1 |
Polished Stainless Steel
w/single diagonal |
CALL |
| SNB2 |
Polished Stainless Steel
w/double diagonal |
CALL |
|
|
| Back to top |
| Hard
Bar ('90-'05) |
|
|
|

|
The Hard Bar is designed for ease of installation,
with the least amount of interference for normal use of the
car. Easily installed in all year model Miatas. |
| |
Full interior height and width and
allows full seat travel and tilt |
| |
Complete use of hard top, soft top
and all glass rear windows |
| |
Available with a durable powdercoat
finish or polished stainless steel |
| |
Constructed of highest quality tubing
1.5" D x .120" wall |
| |
3/16" mounting plates |
| |
Complete hardware kit with grade 8
bolts and instructions |
|
| Code: |
Description: |
Price: |
| HB |
Black Powdercoat |
$215 |
| SHB |
Polished Stainless Steel |
$485 |
|
|
|
|
| M1 Hard Bar Sport ('90-'97) |
|
|
|

|
The Hard Bar Sport uses the same main hoop
as the Hard Bar but with the addition
of larger bolt-in main hoop mounting plates and rear braces
that mount to the structural framework inside the rear wheel
wells. One or two main hoop diagonal braces and/or a harness
bar may be added. Not compatible with the M2 or aftermarket
glass rear window convertible tops. |
| |
Full interior height and width; farther
to the rear than the hard core allowing better head clearance
which allows full seat travel and tilt |
| |
Complete use of hard top and soft top |
| |
Available with a durable powdercoat
finish or polished stainless steel |
| |
Constructed of highest quality tubing
1.5" D x .120" wall |
| |
3/16" mounting plates |
| |
Complete hardware kit with grade 8
bolts and instructions |
|
| Code: |
Description: |
Price: |
| HS |
Black Powdercoat with no diagonal |
$315 |
| HS1D |
Black Powdercoat with single diagonal |
$350 |
| HS2D |
Black Powdercoat with double diagonal |
$385 |
| SHS |
Stainless Steel with no diagonal |
$920 |
| SHS1D |
Stainless Steel with single diagonal |
$1030 |
| SHS2D |
Stainless Steel with
double diagonal |
$1140 |
| H |
Black Powdercoat Harness Bar |
$35 |
|
|
|
|
| M1 Hard Core ('90-97) |
|
|
|


|
The Hard Core bar is designed for the serious
SCCA Solo I competitor that wants to maintain a dual purpose
car for street and racing use. Hard Core
Hardtop and M2 Hard Core versions
available. |
| |
Full interior width which allows full
seat travel and tilt and complete use of soft top |
| |
Single main hoop diagonal brace and
harness bar standard |
| |
Second main hoop diagonal brace may
be added for extra strength and better rear vision |
| |
Available with durable powdercoat finish
or polished stainless steel |
| |
Constructed of highest quality tubing
1.75" D x .120" wall |
| |
3/16" mounting and back-up plates |
| |
Complete hardware kit with grade 8
bolts and instructions |
|
| Hardcore |
| Code: |
Description: |
Price: |
| AB1 |
Black Powdercoat with single diagonal |
$415 |
| AB2 |
Black Powdercoat with double diagonal |
$450 |
| SAB1 |
Polished Stainless Steel
w/single diagonal |
CALL |
| SAB2 |
Polished Stainless Steel
w/double diagonal |
CALL |
| Hardcore
Hardtop |
| TB1 |
Black Powdercoat with single diagonal |
$425 |
| TB2 |
Black Powdercoat with double diagonal |
$460 |
| STB1 |
Black Polished Stainless Steel
w/single diagonal |
CALL |
| STB2 |
Black Polished Stainless Steel
w/double diagonal |
CALL |
|
|
|
|
| The
Ace ('90-'05) |

|
The Ace, Hard Dog's response to popular demand for a traditional roll bar designed with more rearward placement for better head clearance that doesn't interfere with the stock seat belts. |
| |
Allows full seat travel and tilt |
| |
Complete use of hard and soft top |
| |
Compatible with 1990 - 2005 Miatas with original equipment or most after market plastic or glass rear windows* |
| |
Durable black powdercoat finish |
| |
Constructed of highest quality 1.75 X .120 inch 1026 alloy drawn over mandrel tubing |
| |
8 structural attachment points w/ laser cut 3/16" mounting and backup plates |
| |
Complete hardware kit w/ grade 8 bolts |
|
| Code: |
Description: |
Price: |
| ACE |
Side Braced No Diagonal No Harness Bar |
$325.00 |
| AC1D |
Side Braced Main Hoop Single Diagonal |
$360.00 |
| AC2D |
Side Braced Main Hoop Double Diagonals |
$395.00 |
| H |
Harness Bar between rearward braces |
$35.00 |
| HF |
Harness Bar in main hoop |
$35.00 |
| T |
Rearward Braces to top of main hoop
|
$20.00 |
|
|
*Aftermarket convertible top glass rear window must be approximately the same size and shape as OEM 1999 - 2005 glass rear window. |
|
|
|
|
|
|
 |
A different twist utilizing our proven mounting
system. Installation is quite similar to the sport models.
Fits all year models. |
| |
Allows full seat travel and tilt |
| |
Full interior height and width |
| |
Complete use of hard top, soft top
and glass rear window |
| |
Available with a durable powdercoat
finish or polished stainless steel |
| |
Constructed of highest quality tubing
1.75" D x .120" wall |
| |
3/16" mounting plates |
| |
Complete hardware kit with grade 8
bolts and instructions |
|
| Code: |
Description: |
Price: |
| X2 |
Black Powdercoat Single |
$375 |
| SX2 |
Polished Stainless Steel Single |
$985 |
|
|
|
|
| The
Deuce ('90-'05) |
|
|
|


|
The Deuce, Hard Dog's double hoop roll bar,
has styling reminiscent of the AC Cobra. Secured with rearward
bracing, the Deuce mounts to the unibody framework inside
the rear wheel wells using our crash tested frontal and backup
plate design. The Hard Dog Deuce is available with center
mounted rear braces on the main hoops for a retro Cobraesque
appearance, or side mounted rear braces for a cleaner double
hoop appearance. |
| |
Allows full seat travel and tilt and
complete use of hard and soft top |
| |
Compatible with all year model Miatas
with original equipment or after market plastic or glass
rear windows (Center braced Deuce is only compatible with
OEM 1999 and later size glass rear windows) |
| |
Available with a durable powdercoat
finish or polished stainless steel |
| |
Constructed of highest quality 1-3/4
X .120 inch 1026 alloy seamless drawn over mandrel steel
or T-304 stainless steel tubing |
| |
10 structural attachment points with
3/16" mounting and backup plates |
| |
Complete hardware kit with grade 8
bolts and instructions |
|
| Code: |
Description: |
Price: |
| D2 |
Side Braced Black Powdercoat |
$405 |
| D2C |
Center Braced Black Powdercoat |
$405 |
| SD2 |
Side Braced Polished Stainless |
$950 |
| SD2C |
Center Braced Polished Stainless |
$950 |
| H |
Harness Tabs |
$35 |
|
|
| |
 |
Stitched Covers w/ our NEW Custom Formed High Density Padding |
| Item/Number |
Description |
Price |
| V |
Black Vinyl w/ custom formed padding |
$85.00 |
| L |
Black Leather w/ custom formed padding |
$125.00 |
|
|
| |
| Custom Formed High Density Padding - Hard Bar, Sport Bars or Hard Core Bars |
|
| Item/Number |
Description |
Price |
| S PAD |
For Hard Bar and/or Sport Bars |
$45.00 |
| C PAD |
For Hard Core & Z3 Bars |
$45.00 |
|
|
|
| |
| WARNING: These articles
are sold without warranty, expressed or implied. No warranty
is made to this product's ability to protect the user from any
injury or death. The user assumes that risk. |
|